Published figures
- Type
- MC
- Mass
- 9.5 g
- Compliance
- 10 cu dynamic @ 100 hz (jis)
- At 10 Hz
- ~17 cu estimated
- Source
- youtek.jp
Checked against the manufacturer's published specification.
The maker quotes compliance dynamic @ 100 hz (jis), so the 10 Hz figure the resonance formula needs is a conversion. Treat the results on this page as approximate.
Open in the resonance calculatorOn the Clear Wave — 11 g
In the 8 to 12 Hz band: above warp and footfall frequencies, below the audible range. This is where you want it. The pairing is well matched.
With the ceramic headshell spacer (13 g): 8.0 Hz ✓
Based on a compliance figure converted to 10 Hz, so treat it as approximate.
Assumes 0.5 g of mounting hardware.
On other arms
| Arm effective mass | Resonance | |
|---|---|---|
| 8 g | 9.1 Hz | ✓ in the 8–12 Hz band |
| 10 g | 8.6 Hz | ✓ in the 8–12 Hz band |
| 12 g | 8.2 Hz | ✓ in the 8–12 Hz band |
| 14 g | 7.9 Hz | below the band |
| 16 g | 7.6 Hz | below the band |
| 20 g | 7.0 Hz | below the band |
Figures are as the manufacturer publishes them. Compliance measured at 100 Hz or quoted as static is converted to an estimate at 10 Hz and marked with a tilde; treat those results as approximate. Suspensions also vary between samples and soften with age, so a calculated resonance is a guide, not a verdict. Spotted an error? Tell us at info@boolaudio.com and we will check it against the source.
Cartridge names are the trademarks of their respective manufacturers. Bool Audio is independent of them all, and none has endorsed this database.